SHARK Island

TATSUNO dispensers of the SHARK Island series (BMP2000.SI) are used to dispense liquid petroleum products at public and private gas stations for road motor vehicles. They are modern one-sided or double-sided dispensers with one to four dispensing hoses (max. two dispensing hoses on each side of the dispenser) for pumping one to two fuel products. Dispensing nozzles can be placed either towards the lane (LANE) or on the side of the dispenser (designation -S, ISLAND). There are two variants of the SHARK Island stand - a variant with a total height of 1700 mm without a portal and a variant with a height of 2100 mm finished with a portal. The dispensers of modern design are equipped with high-quality Japanese TATSUNO hydraulics and a reliable PDEX5 electronic counter. The fuel dispensers are operated both in the manual mode (i.e. off-line), and in the automatic mode, where the fuel dispenser is linked with the kiosk control system and the data concerning volume, sum and price are transmitted to POS. 

Dispenser's documents:

• Overview of dispenser models, dimensions
• Installation and user manuals
• ATEX certificates
• MID certificates
• Vapour recovery system certificates
• EU Declaration of Conformity

Specification

• Long life and high accurate hydraulics TATSUNO (Japan)
• Reliable electronic counter PDEX5
• LCD displays (7-6.5-5) with electronically controlled LED backlight
• Modern compact design
• Accurate pulse generators TATSUNO (Japan)   
• Electronic totalizers and electromechanical totalizer for every dispensing nozzle
• Infra-red remote controller for dispenser setup
• Vapour recovery system with electronic signalling and monitoring system (optional)
• Dispensing nozzles TATSUNO Ultra (Japan), hoses ZVA-ELAFLEX (Germany)
• Free hanging hoses with hose mast (optionally for version Island 1700)
• Proportional valves for preselection of dispensed amount/volume
• 4 or 12buttons keypad for amount/volume preselection
• MIN/MAX flow button (optionally) - 130/80 or 80/40 or 40/5 LPM (motobikes) 
• Any model colour - on customers request
• Possibility to install payment terminal - on customers request
• Temperature volume correction to volume at 15°C (optionally)
• Diagnostic line (optionally)

 

Technical Specifications

 

Delivered flow rate:	standard 40 L/min high 80 L/min ultra high 130 L/min to 160 L/min
Accuracy of dispensing:	± 0.15% (at min. delivery 2 litres)
Maximum pressure:	standard 0.18 MPa high 0.25 MPa
Electric motors:	thrее-phase, 3x400V/50Hz, 0.75kW, 1395 rpm
Counter power supply:	230V +10% -15%, 50Hz max.85VA
Power supply of the switching elements:	230V, 50Hz
Operating temperature:	standard -20°C ÷ +40°C advanced -40°C ÷ +50°C